10
KILL SWITCH INSTALLATION
To install the throttle kill switch, first pick one of the two wire coming out from the kill switch, don’t matter
which, secure it anywhere to the trike frame with a small self-drilling screw, this is the ground. The other
wire, run it along the trike frame, securing with wire ties as you go, pull sire up close to the engine kill
switch. Cut wire from the engine to kill switch and install a wire connector then install throttle kill switch
wire to this connector. When you push the throttle kill switch, this will ground the magneto and kill the
engine.
ORIGINAL KILL SWITCH
DISCONNECTED
2
ND
KILL SWITCH
WIRE CONNECTS
WIRE TO THE
KILL SWITCH
Summary of Contents for GasTrike 212CC
Page 1: ...1 GASBIKE s TRIKE CONVERSION KIT...
Page 2: ...2...
