6
ENGINE MOUNTING PLATE SETUP
Parts Required:
•
3/16” Thick Steel Engine Mount (Included in the kit)
•
4 x U-Clamps ( Included in the Kit )
Installation:
•
Align the P2 marked hole (on the engine mount plate) with the left rear hole of the trike (If you are
standing behind the trike, facing forward). And P1 marked hole with the left front hole on the trike.
•
Secure the place with ¼” bolts. (comes with the trike,
NOT
included in the kit)
•
Now use the 4 u-clamps to secure the plate with the trike using the position marked as U1, U2, U3
and U4 with the trike.
•
You might need to shave the extended piece of U-Clamp for either U1 or U3 depending upon your
engine placement.
Summary of Contents for GasTrike 212CC
Page 1: ...1 GASBIKE s TRIKE CONVERSION KIT...
Page 2: ...2...
