27
View menu
(shows system status and configuration, but does not allow changes to be made)
Menu system overview
Menu Item
Values
(as shown on display)
Description
Relay com stat
Alarm L1 common
Values =
No alarm
In alarm
Alarm L2 common
Values =
No alarm
In
alarm
Fault common
Values =
No alarm
In
alarm
L1 = Level 1.
L2 = Level 2
The ‘values’ show the current state of each relay
(relays may be normally energised or de energised
dependant on configuration):
‘No alarm’ means the relay is in its normal state.
‘In alarm’ means the relay is in its alarm or fault
state.
Relay chan stat
Alarm L1 #1
Values =
No alarm
In
alarm
Alarm L2 #1
Values =
No alarm
In alarm
#1 refers to the input channel, use the Down button
to scroll to channels #2, #3, #4 if appropriate.
L1 = Level 1.
L2 = Level 2 (use the down key to view level 2).
The ‘values’ show the current state of each relay
(relays may be normally energised or de-energised
dependant on configuration):
‘No alarm’ means the relay is in its normal state.
‘In alarm’ means the relay is in its alarm state.
Output status
Output #1
Values = 0.0 to 25.5 mA
#1 refers to the input channel, use the Down
button to scroll to channels #2, #3, #4 if
appropriate. The ‘values’ show the current
analogue output level for a channel.
Input status
Input #1
Values = 0.0 to 66.7 mA
#1 refers to the input channel, use the Down
button to scroll to channels #2, #3, #4 if
appropriate. The ‘values’ show the current signal
input level for a channel.
Supply status
Supply
Value = 19.8 to 40 V
Indicates the DC supply level from either the
internal PSU or an external DC supply.
Configuration
See table Supervisor menu :
* #1 denotes the channel number and therefore may read #2, #3 or #4 on Gasmaster.
Summary of Contents for Gasmaster
Page 12: ...9 2 Installation ...
Page 28: ...25 Menu system overview ...
