SERVICE WORK ON THE CHASSIS 11
47
E02005-10
Main work
–
Take off cable holder
1
in front of the left radiator.
–
Remove screw
2
.
–
Remove screw
3
.
–
Remove the upper triple clamp with the handlebar and hang them
to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
E02006-10
–
Remove O-ring
4
. Remove protective ring
5
.
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.10
Installing the lower triple clamp
V00359-10
Main work
–
Clean the bearing and sealing elements, check for damage, and
grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount upper
steering head bearing.
–
Check whether upper steering head seal
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.
E02005-11
–
Position the upper triple clamp with the handlebar.
–
Mount screw
4
, but do not tighten yet.
