12 BRAKE SYSTEM
78
100397-01
–
Check that spring plate
6
in the brake caliper and brake pad slid-
ing plate
7
in the brake caliper bracket are seated correctly.
J00079-10
–
Insert the new brake linings, insert pin
5
, and mount cotter
pins
4
.
Guideline
Mount the outer cotter pins from the front to the rear.
Mount the inner cotter pins from the rear to the front.
Info
Always change the brake linings in pairs.
–
Operate the hand brake lever repeatedly until the brake linings are
in contact with the brake disc and there is a pressure point.
E02029-10
–
Correct the brake fluid level to level
A
.
Guideline
Level
A
(brake fluid level
below reservoir rim)
5 mm (0.2 in)
Brake fluid DOT 4 / DOT 5.1 (
–
Position cover
2
with membrane
3
. Mount and tighten
screws
1
.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
