10 TUNING THE CHASSIS
40
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Read the accompanying
GASGAS Technical Accessories
instructions.
–
Adjust the air pressure as specified.
Guideline
Air pressure
9.6 bar (139 psi)
Gradual changing of the air
pressure in steps of
0.2 bar (3 psi)
Minimum air pressure
7 bar (102 psi)
Maximum air pressure
12 bar (174 psi)
Info
Never adjust the air pressure to a value outside the stated
range.
–
Disconnect the fork airpump from the left fork leg.
When disconnecting, excess pressure will escape from the hose
–
the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
10.14
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
E01987-10
–
Turn adjuster
1
clockwise all the way to the stop.
Info
Adjuster
1
is located at the upper end of the right fork leg.
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Compression damping
Comfort
17 clicks
Standard
12 clicks
Sport
7 clicks
Info
Turn clockwise to increase damping; turn counterclockwise
to reduce damping during compression.
