GAS GAS EX 250 2023, Owner'S Manual

Page: 48 / 144

11 SERVICE WORK ON THE CHASSIS
46
I01081-10
–
Position the brake caliper. Mount and tighten screws
4
.
Guideline
Screw, front
brake caliper
M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Position the brake line and the clamp. Mount and tighten
screws
5
.
Finishing work
–
Install the front wheel. ( p. 85)
11.7 Removing the fork protector
E01988-10
–
Remove screws
1
. Remove the clamp.
–
Remove screws
2
. Take off the left fork protector.
–
Remove screws
3
. Take off the right fork protector.
11.8 Installing the fork protector
E01988-11
–
Position the fork protection on the left fork leg. Mount and tighten
screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and tighten
screws
3
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 43)
–
Remove the front wheel. ( p. 84)
–
Remove the fork legs. ( p. 45)
–
Remove the start number plate. ( p. 50)
–
Remove front fender. ( p. 51)
–
Remove the handlebar cushion.