GAS GAS EX 250 2023, Owner'S Manual

Page: 53 / 144

SERVICE WORK ON THE CHASSIS 11
51
11.15 Installing the start number plate
E02011-10
–
Connect the brake line at the start number plate.
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw
1
.
11.16 Removing front fender
Preparatory work
–
Remove the start number plate. ( p. 50)
E02012-10
Main work
–
Remove screws
1
and
2
. Remove front fender.
11.17 Installing front fender
E02012-10
Main work
–
Position front fender. Mount and tighten screws
1
and
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 51)
11.18 Removing the shock absorber
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 43)