GAS GAS EC250 2012, Owner'S Manual

Page: 56 / 81

Owner’s manual
-56-
Maintenance
Removing the rear shock
To remove the rear shock from the frame follow these steps:
1. Stabilize the bike with a stand or a support.
2. Keep the rear wheel o ff the ground.
3. Loosen the seat clamping screw (1) and remove it by pulling it back.
4. Remove the silencer (see “Silencer change” in point 10).
5. Disengage the side covers of their hooves on the radiator (2).
6. Loosen the screw of the fuel tank (3) and the side fairings screws (4).
DANGER
Check that the fuel tap is closed and the gas tube is disconnected prior to remo-
ving the fuel tank from the frame.
7. Remove the fuel tank of the frame by pulling it upward.
8. Loosen the screws holding the exhaust pipe (5).
9. With the help of a spring puller, remove the springs from the the exhaust
inlet (6).
10. Remove the exhaust pipe by pulling it forward.
1
2
3
6
4
5