GAS GAS EC250 2012, Owner'S Manual

Page: 32 / 81

Owner’s manual
-32-
Daily inspection
Is the brake fl uid level correct? Front and rear brake fl uid tanks have a view fi n-
der (1 and 2) to check its level.
DANGER
The brake fl uid level must be in the center of the view fi nder, as a minimum, in
both tanks, verify the thickness of brake pads and to ensure that they have not
reached its limit of use. If the thickness is correct, complete brake fl uid tank and
ensure that there are no leaks. If you have any doubt go immediately to your GAS
GAS o ffi cial service. This may a ff ect your safety.
Is the clutch fl uid level correct? Verify as follows: motorcycle on its lateral stand
and the handlebar at the right side, in this posi ti on take o ff the top tank cover
with its rubber (a tt en ti on to the dirt, is necessary to have a clean space where
you leave the disassembled parts), slowly turn the handlebar to the le ft to get the
level of the fl uid to be parallel to the upper edge of the tank. The correct level is
6~8 mm from upper edge of the tank. If you have any doubt go to your GAS GAS
o ffi cial service .
Are the brake discs correct? Visually you can see signi fi cant scratches, cracks,
excessive wear and tear, etc.
DANGER
Verify that the thickness of the discs are 3mm on the front and 3,5mm on the
rear minimum. Go immediately to your GAS GAS o ffi cial service if you don’t know
what to do in each case, this may a ff ect your Safety. You must not ride your mo-
torcycle.
1
2