Care and Maintenance
——————————
8.04
O
iling the hook
Switch the machine off!
Danger of injury if the machine is started
accidentally!
●
Pour
1-2 drops
of oil into hole
1
of the hook gib daily.
●
Before commissioning the machine, and after long
periods out of operation, pour a few drops of oil into
the hook race (see arrow).
8.05
Check the oil level before each use. There
must always be oil in reservoir
1
.
●
If required refill oil through hole.
Use only oil with a mean viscosity of 22.0 mm2/s at 40°C and a density of 0.865g/cm3 at
15°C
8-4
9
Care and Maintenance
8.06
Filling the oil reservoir of the thread lubrication unit
Control the oil lvevel before each use.
There must always be oil in the reservoir
1.
●
If necessary, fill oil up to mark through hole.
We recommend thread lubricatiing oil .
www.garudan.cz
