Adjustment
——————————
9.03.16
Roller presser
Adjustment
——————————
●
Raise the roller presser.
●
Always observe
Requirement 1
for subsequent adjustments.
●
Adjust roller presser
1
(screw
2
) according to
Requirement 2
.
●
Lower roller presser
1
to rest on feed wheel
5
.
●
Adjust roller presser bracket
3
(screw
4
) according to
Requirement 3
.
When sewing very tight curves, the roller presser 1 must be moved a little
towards the operator.
Requirement
When the roller presser
1
is touching the feed wheel
5
it must:
1. be parallel to feed wheel
5
, as seen in the direction of sewing.
2. be in the centre of the needle (on model GP-724 the left needle), as
seen in the direnction of sewing.
3.
be as near as possible to the needle (on modelGP-724 the left
needle), as seen crosswise to the direction of sewing.
www.garudan.cz
