●
Turn thread guide
6
accordingly
Tighten nut
5.
7.04
Removing/Inserting the babblin case
Switch the machine off!
Danger of injury if the machine is started
accidentally!
Removing the bobbin case:
●
Open the post cap.
●
Raise latch
1
and remove bobbin case
2
.
Inserting bobbin case:
l
Insert bobbin case
2
.
●
Close the latch and close the post
7.05
●
Insert the bobbin into the bobbin case
1
.
●
Pass the thread through the
slot under spring
2
.
●
Pass the thread through the
notch.
●
Adjust the thread tension by
turning screw
3
.
When the thread is pulled, the bobbin must
rotate in the direction of the arrow.
H962 is shown in
Fig.
www.garudan.cz
