Adjustment
——————————
9.04.02
Position of the thread catcher holder
●
Adjust the thread catcher holder
1
(screws
2
) according to
Requirements
.
If
Requirement 2
cannot be fulfilled, loosen screw
2
and move the toothed
segment
4
by one tooth.
Requirement
1. there should be a minimum amount of play between toothed wheel 3
and toothed segment
4
.
2. both in the neutral position and the foremost position of the catcher,
the distance between the toothed segment
4
and the outer edge of
the thread catcher holder
1
should be the same (see arrow).
www.garudan.cz
