CSI Pro™ 9
7. Depress the spring clip in the S-stem (containing control housing)
and insert S-stem through the upper camlock collar into the
upper stem.
8. The spring clip must be engaged in the FIRST stem opening in
order to maintain battery compartment access. Hand-tighten
the camlock collar. Do not overtighten!
9. Depress the spring clip in the lower stem and adjust to the most
comfortable operating length. Hand-tighten the lower stem
camlock collar. Do not overtighten!
10. Wrap the cable snugly about the stem with the first turn of the
cable over the stem.
11. Insert the coil connector into the 4-pin connector of the control
housing and hand-tighten. After lining up the connector
pins, press the connector in firmly, yet carefully, until the O-ring
is felt to be fully inserted.
Note: If the O-ring is properly
seated, the connector's collar
can be easily tightened; if the
collar is difficult to turn, the
O-ring may not be seated
properly.
7.
8.
1st pin position
9.
10.
11.
Summary of Contents for CSI PRO
Page 3: ...2 Garrett Metal Detectors...
