ASSEmBLy
8 Garrett Metal Detectors
1. Holding the upper and lower stem assembly in front of you (as
shown below), twist camlock to the right (clockwise) to loosen.
2. Slide lower stem out to engage spring clips in upper stem holes.
3. Align the holes in the mounting washers with the small posts on
the lower stem and press firmly into place.
4. Slide the searchcoil onto the stem.
5. Insert the threaded bolt through the holes of the lower stem and
searchcoil. Hand-tighten searchcoil assembly with the wing nut.
6. Holding assembly as shown, loosen camlock at the end of the
upper shaft by turning counter-clockwise.
Note: If the camlock collar slides off during loosening, simply
slide it back on and tighten slightly.
1.
2.
3.
4.
5.
6.
Summary of Contents for CSI PRO
Page 3: ...2 Garrett Metal Detectors...
