10 Garrett Metal Detectors
12. If needed, adjust the arm cuff by removing the screw on the
bottom. move the two-piece cuff to the other hole, reinsert the
screw through the headphone cable clip, and tighten.
12.
13. If desired, attach headphones to the 2-pin connector of the
Control Housing. After lining up the connector pins, press the
connector in firmly, yet carefully, until the O-ring is felt to be
fully inserted.
14. Secure the headphone cable under the detector's arm cuff by
pressing the cable into the headphone cable clip.
Note: Headphones are not required but are desired by many
hunters to hear faint targets. Connecting the headphones will
silence the detector's speaker.
Note: The provided headphones are for dry use only; see page
55 for optional waterproof headphones.
13.
14.
Summary of Contents for CSI PRO
Page 3: ...2 Garrett Metal Detectors...
