26 Garrett Metal Detectors
Use the NOTCH DISC buttons to position the Target ID Cursor above the pixel
you wish to eliminate
(see above illustration)
. Use the ELIm pushbutton to
delete this pixel from the Lower Scale
(see below)
. This item is now rejected.
Example: Manual Modification of Notch Discrimination Pattern
The second method of modifying the Notch Discrimination
pattern involves the use of only the ELIm pushbutton. When
an unwanted target is audibly detected while hunting, simply
push the ELIm button to create a notch at that Target ID
Cursor. The next time the
CSI Pro
encounters the same trash
item, it will not produce an audible signal.
The
CSI Pro's
ELIm pushbutton can also be used
to find
specific metal items
. For example, if a particular shell casing
is being sought at a crime scene, scan a matching shell
casing with the
CSI Pro
while in the ZERO mode. Note where
the Target ID cursor appears when the casing is scanned.
Next, use the NOTCH DISC and ELIm pushbuttons to switch
off all the pixels except the one for the desired target range.
Note:
Depending upon how the shell casing is laying in the
ground, its Target ID may shift a little; therefore, your ability
to find it will be enhanced by turning on an additional pixel
on either side. The
CSI Pro
is now programmed to find the
Summary of Contents for CSI PRO
Page 3: ...2 Garrett Metal Detectors...
