1
Tones - Threshold and tones settings
V1.0
of the
introduces some new features/modifications described below :
With Full Tones, the ground area is audible from -6.4. The discrimination setting acts as
a “tone break,” and the Iron Volume setting adjusts the volume of ground and ferrous
below the discrimination level.
Full tones
From Full Tones, press
(3sec).
Customize the sound partitioning of the discrimination range for Full Tones and Adjust
volume levels of each tone independently.
Press
to choose the TONE BREAK (T. BREAK) or the VOLUME (VOL) and set them
using + and - .
Full tones - Threshold and volume settings
the OFFSET FT feature allows the user to shift the “Full Tone” audio frequencies of tar-
gets with a signature just above the Discrimination threshold, in order to better differen-
tiate them audibly from iron.
0 = no offset
5 = (default value) creates a little offset
40 = all targets above discrimination will sound with the same high tone.
Offset Full tones
(Only with Full Tones mode ON)
The tone of the Threshold (and the deepest / smallest targets) can be modified from 150
to 603 Hz. Press (3sec) and adjust it with and .
Threshold
(Only with Pitch mode ON)
Press
>
DISCRI
>
(3 sec). Choose
2 Tones - 3 Tones - 4 Tones - 5 Tones.
Press
(3 sec) to access the
MULTI TONES
screen.
Customize the sound partitioning of the discrimination range. A volume level (0 to 10) and
a sound frequency (comparatively low- or high-pitched) is assigned to each part of the
discrimination range. Press
to choose the Tone, the TONE BREAK (T. BREAK) or the
VOLUME (VOL) and set them using + and - .
Volume of the low-pitched tone (tone 1) is the same as the Iron Volume.
TONE
1
T.BREAK
Hz
100
T.BREAK
VOL
35
OFFSET FT
5
THRESHOLD
2
NOTCH 2
28-46
Select
NOTCH 1
inside
MENU
>
DISCRI
and press
(3 sec).
This advanced notch function enables you to widen the rejection window in the event
that the undesirable target(s) have a fluctuate conductivity. Select Tone break 1 or 2 with
(3 sec). Adjust the values
and
.
If several targets with different conductivity levels are a problem, you can activate two
other notches: N2 and N3. Use
to select N2 or N3 and adjust as for N1.
Multi-Notch
TONES
FULL
TONES
WS
6
MASTER
V1.0
