background image

Comprehensive Operating Manual & Guide to Metal Detecting

F75

Metal Detector

Users Manual

5-Year Limited Warranty

The 

F75

metal detector is warranted against defects in materials and

workmanship under normal use for five years from the date of purchase to the
original owner. 

Damage due to neglect, accidental damage or misuse of this product is not
covered under this warranty. Decisions regarding abuse or misuse of the
detector are made solely at the discretion of the manufacturer. 

Proof of Purchase is required to make a claim under this warranty.

Liability under this Warranty is limited to replacing or repairing, at our option,
the metal detector returned, shipping cost prepaid, to Fisher Labs. Shipping
cost to Fisher Labs is the responsibility of the consumer.

To return your detector for service, please first contact Fisher Labs for a Return
Authorization (RA) Number. Reference the RA number on your package and
return the detector within 15 days of calling to:

Fisher Research Labs, Inc.

1465-H Henry Brennan Dr.

El Paso, TX 79936

Phone: 915-225-0333 ext.118

Warranty coverage does not include the cost of transporting the detector back
to an owner who is located outside of the United States of America.

Copyright© 2007 by Fisher Research Labs, Inc.

All rights reserved, including the right to reproduce this book, or parts thereof, in any form.

Published by Fisher Research Labs, Inc.

Fisher® is a registered trademark of Fisher Research Labs, Inc.

www.fisherlab.com

1465-H Henry Brennan Dr., El Paso, TX 79936 • (915) 225-0333

F75-MANUAL.qx6  8/15/07  9:42 AM  Page 1

Summary of Contents for F 75













































Reviews: