26
27
EN
EN
Assembly instructions for fitters /
Load balancing settings in the web interface
Assembly instructions for fitters /
Load balancing settings in the web interface
A.
Select current or power limitation
B.
Set maximum current (A) or power (kWh)
C.
In the case of a single-phase charger, if the charger is to be controlled by load
balancing, the phase assignation must be set. Three-phase chargers do not have
phase assignation.
D.
Search for other connected wallboxes. These are shown in the list through their
respective serial numbers.
E.
Always save settings entered!
A
B
C
E
D
(figure 19)
(figure 20)
