ii
FCC Compliance &
GMRS Licensing
FCC Compliance
The Rino 120 complies with Part 15 of the FCC
regulations and with Canadian ICES-003 for Class B digital
devices. Operation of this device is subject to the following
conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
x
Reorient or relocate the receiving antenna.
x
Increase the separation between the equipment and
receiver.
x
Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
x
Consult the dealer or an experienced radio/TV technician
for help.
The Rino 120 does not contain any user-serviceable
parts. Repairs should only be made by an authorized
GARMIN service center. Unauthorized repairs or modifi ca-
tions could result in permanent damage to the equipment,
and void the warranty and your authority to operate this
device.
FCC Licensing Information
The Rino 120 two-way radio operates on Gen-
eral Mobile Radio Service (GMRS) frequencies that are
regulated by the Federal Communications Commission
(FCC) in the United States. In order to transmit on these
frequencies, you are required to obtain a license from the
FCC. An individual 18 years of age or older, who is not a
representative of a foreign government, is eligible to apply
for a GMRS license. To apply for a GMRS license, you will
need FCC Form 605 (605 Main Form and Schedule F) and
Introduction
rino120_10.indd ii
9/13/2002, 3:27:33 PM