Garmin NavTalk NavTalk GSM Owner'S Manual Download Page 32

Page: 32 / 130

Getting Started

Section 2

Settings Tab - System Pages

Display

Time

Interface

The third item on this list is the

System

pages which is another

tabbed directory for accessing three unit features.

• The

Display

page with Backlight Timeout, Display Timeout, Units

of Measure, and Language options.

Page

Options:

Restore Defaults.

• The

Time

page with Time Setting, Time Format, Time Zone

options, and Daylight Savings Time options.

Page

Options:

Restore Defaults.

• The

Interface

page with Serial Data Format options, Baud Rate

options, Beacon, Frequency, Bit Rate options, and Beacon Receiver

Status

Information.

Page Options: Restore Defaults.

The Main Menu

NvTlkGSMManual copy.indd 22

12/2/2002, 8:42:09 AM

Summary of Contents for NavTalk NavTalk GSM



































































































































Search results

Summary of Contents for NavTalk NavTalk GSM

Reviews:

Related manuals for NavTalk NavTalk GSM

Brands by name

Popular brands

Garmin NavTalk NavTalk GSM, Owner'S Manual

Search results

Summary of Contents for NavTalk NavTalk GSM

Reviews:

Related manuals for NavTalk NavTalk GSM

Brands by name

Popular brands