16-20
Garmin GTN 725/750 Pilot’s Guide
190-01007-03 Rev. D
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
16.4.1.4 Crossfill
Dual units may be interfaced to crossfill information between the two units.
This option will not be available unless dual units are configured.
When Crossfill is turned on with one GTN, it is automatically turned on in the
other GTN. Some items are always crossfilled regardless of the crossfill setting;
others are dependent on the crossfill setting.
The GTN can be can also be interfaced with the GNS 400W/500W units. The
GTN can automatically send the Active Flight Plan and active Direct-To course to
the GNS unit. The GTN User Waypoints can be manually sent to the GNS unit. The
GNS unit can manually send its User Waypoints to the GTN unit.
Waypoint names longer than six characters, or duplicates, sent from the GTN
unit to the GNS unit will replace some characters with a "+" sign, while leaving
significant characters to aid in identification (such as, USR003 becomes US+003).
NOTE
: Upon crossfill being activated, the GTNs may take up to 10 seconds
to crossfill the flight plans. The pilot must verify the flight plan in each unit
prior to use. The GTN and GNS units must have databases with the same cycle.
NOTE
: When GPS navigation is lost in either unit, crossfilling may not be
available until GPS is restored in both units. Crossfilling will resume one the
flightplan is changed on one of the units or crossfill is re-enabled.
GTN-to-GTN Crossfilling:
This data is always crossfilled:
• User waypoints
• Flight plan catalog
• Alerts (traffic popup acknowledgement, missed approach waypoint
popup acknowledgement, altitude leg popup acknowledgement)
• External sensors (transponder status and commands, synchro heading)
• System setup:
- User-defined NAV frequencies to store favorites
- Date/Time convention
- Nearest airport criteria
- Units (Nav angle, Distance/Speed, etc.)
- User-defined COM frequencies to store favorites
- Ownship icon
- CDI Scale setting
- ILS CDI Capture setting
Summary of Contents for GTN 725
Page 553: ......
