5-1
190-01007-03 Rev. D
Garmin GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
5 DIRECT-TO
The GTN 7XX Direct-To function can quickly set a course to a nearby facility.
If the pilot selects Direct-To to a waypoint that is in the flight plan, waypoint
sequencing in the flight plan will resume upon reaching that waypoint. If the
pilot selects Direct-To for a waypoint that is not in the flight plan, the flight
plan will no longer be active but remains available. There are some fixes within
procedures for which if a Direct-To is selected then the approach will not be
active. For example, if you activate a Direct-To course to a waypoint between
the FAF and the MAP and go Direct-To to that waypoint then approach guidance
will not become active.
5.1
Direct-To Navigation
1. Press the
Direct-To
key on the right side of the unit.
Figure 5-1 Direct-To Wpt Page
2. Select
Waypoint
,
FPL
, or
NRST APT
from the Direct-To
window by touching the desired tab.
3. If a specific course is desired, touch the
Course To
key.
Summary of Contents for GTN 725
Page 553: ......
