10-32
Garmin GTN 725/750 Pilot’s Guide
190-01007-03 Rev. D
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
10.7.3.2 Shield Setup
The Shield Setup function allows you to select the Shield Type (mode of
operation) and the size of the shield volume that will provide alerts when
entered by aircraft.
Approach Shield Type
1. While viewing the TCAD Control menu, touch the
Shield Type
key and touch the Approach Shield Type.
Touch To Automatically
Select The Destination
Airport Field Elevation
Touch To Manually
Set Field Elevation
Touch To Select
Shield Type:
Approach or
Standard
Figure 10-28 TCAD 9900B Shield Setup for Approach
2. Touch the
Field Elevation
key.
3. With the
Use DEST APT
key deactivated (no green bar), touch
the
Field Elevation
key to manually select the Field Elevation
for traffic reporting. Use the keypad to select the elevation
value.
4. Touch the
Enter
key to accept the selected value. The selected
value will be shown in the
Field Elevation
key.
5. Touch the
Use DEST APT
key to automatically use the field
elevation of the destination airport of the active flight plan for
traffic reporting.
NOTE:
Activating the Use DEST APT feature automatically uses the
elevation for the current destination airport for the TCAD. If no destination
airport is present in the GTN system, the TCAD will not receive a field
elevation and therefore not automatically enter approach mode.
Summary of Contents for GTN 725
Page 553: ......
