Viewing Information
GPSMAP 400/500 Series Owner’s Manual
33
Selecting the Engines Shown in gauges
You must manually select the number of engines shown in the engine gauges
) before you can select the engines for which information appears in
the gauges.
1. From the Home screen, select
information
>
dashboard
>
Engine
>
MENU
>
gauge Setup
>
Engine Selection
>
Edit Engines
.
2. Select
first Engine
.
3. Select the number of the engine for which you want to view information in
the first gauge or bar.
For example, if you select “3,” the first engine bar shows information for
the engine identified as “Engine3” on the NMEA 2000 network.
4. Repeat step 3 for the second, third, and fourth engine bar, as needed.
5. Select
back
.
Viewing Engine gauges
To view engine information, your chartplotter must be connected to a device
capable of measuring fuel level
➊
, fuel flow
➋
, or both.
From the Home screen, select
information
>
dashboard
>
Engine
.
➊
➋
Configuring Engine gauges
The amount of fuel on board can be represented by either the total fuel level
(numeric) or by individual tank level (graphic).
From the Home screen, select
information
>
dashboard
>
Engine
>
MENU
>
gauge Setup
>
fuel display
.
•
Use Total fuel Level
—select to display a numeric value for the total
fuel level.
•
Use fuel Tank Levels
>
Num. Tanks
—select to display a graphical
representation of all the specified tanks.
