Entering a New Location
From the GPS options menu you can enter a New Location and
New Altitude to simulate from.
To enter a New Location using the map:
1. Press
MENU
twice and highlight
GPS
from the vertical menu.
2. Press
MENU
to open the options menu
.
3. Highlight
New Location
,
and press
ENTER
.
4. Highlight
Use Map
, and press
ENTER
.
5. Use the
ROCKER
to move the panning arrow to the location
on the map you want, and press
ENTER
.
You can also select a New Location by entering an airport identifier
(code). Select
Use Identifier
from the GPS tab options menu. Enter
the airport code using the
ROCKER
. Refer to
page 14
for complete
instructions about entering airport identifiers and user waypoints.
To adjust the simulated speed, heading, and altitude
from the Panel, Pointer, or Highway pages:
1. Press up on the
ROCKER
increase the speed in
10 knot/kph/mph increments. Press down on the
ROCKER
to
decrease the speed in the same increments.
2. Press left or right on the
ROCKER
to change heading.
3. Press the
IN
and
OUT
Zoom keys to increase or decrease
altitude (Aviation Mode only).
12
GPSMAP 396 Pilot’s Guide
G
ETTING
S
TARTED
>
S
IMULATED
B
ASIC
N
AVIGATION
