manualshive.com logo in svg

Garmin GPSMAP 172, Owner'S Manual

Share
Download
Garmin GPSMAP 172 Owner'S Manual Download Page 67

Main Menu: 

GPS Tab Options

The Differential SNR (Signal to Noise Ratio) indicates, on a scale to 0-30db with 30db being the 

best, the strength of the DGPS signal being received. The SNR depends upon the mounting of your 
DGPS receiver and the distance from the DGPS transmitting station.

The GPS Info tab features an options menu that provides access to functions and features relating 

to the GPS Info display.

The following options are available by pressing 

MENU

 on the GPS Info Tab of the Main Menu:

•  Start/Stop Simulator—

 toggles the unit simulator on or off. Retail Demo mode restores factory 

settings to the unit if left unattended for over two minutes. This mode should only be used for 
display purposes. User waypoints are NOT deleted.

• WAAS On/WAAS Off—

 toggles the WAAS capability of the receiver on or off.

•  Track Up/North Up—

 allows you to select between a north up or track up sky view display for 

the GPS Info display only.

•  AutoLocate—

 allows the receiver to locate your position automatically. This process can take up 

to five minutes.

•  Initialize Position—

 allows you to initialize the receiver graphically on the Map Page to initially 

help the receiver acquire more quickly. See page 4 for instructions on initialization.

•  Set 2D Elevation—

 allows you to manually enter the elevation when in 2D or Simulator mode 

only. Any elevation entered is automatically calculated when the GPS is in 3D mode.

To select a menu option:

1.   Using the 

ARROW KEYPAD

, highlight the desired option and press 

ENTER

.

NOTE:

 If a DGPS recever s attached to the unt and Garmn DGPS, RTCM In/NMEA 

Out, or Other DGPS s enable on Port , WAAS s automatcally dsabled (WAAS Off). It 
s not possble for the GPSMAP /C to receve WAAS and DGPS correctons at the 
same tme.

F

GPS Tab Options Menu

Reference

Summary of Contents for GPSMAP 172















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands