9-3
The Operating Mode Page is displayed
showing the current operational mode.
Press the right arrow to place the cursor
on the operational mode field.
Press CLR (repeatedly) until
“Simulator?” is displayed.
Press ENT to select simulator mode.
The cursor is on the reference identifier
field. Set the initial position by entering
the identifier for St. Petersburg -
Clearwater International Airport (KPIE).
(NOTE: This sample trip assumes that
the Americas database is used. If you
are using the International database
you may create user waypoints using
the coordinates given below, or you
may follow these general steps, but
substitute waypoints from your area of
interest.)
Press the “4” key to select the letter
“K”.
Press the “6” key followed by the left
arrow key to select the letter “P”.
Continue pressing the alphanumeric
and, if needed, arrow keys until the
waypoint identifier has been entered.
Press ENT when complete.
CLR
ENT
JKL
4
PQR
6
*Press repeatedly until
“Simulator” is displayed
ENT
*Continue pressing the
alphanumeric and arrow
keys, if needed, to enter
the waypoint identifier
