5-9
Press the “4” key, followed by the right
arrow key to select the letter “L”.
Press the “2” key to select the letter
“E”.
Continue pressing the desired
alphanumeric keys and, if needed, the
arrow keys to enter the “LENEX”
intersection. Press ENT when
complete.
The cursor is over the reference
bearing. Since the simulation will begin
at LENEX you do not need to define a
reference bearing from this point.
Press ENT.
The cursor is over the reference
distance. Enter a distance of zero and
press ENT. The initial position is now
set at the LENEX intersection.
You can view your position coordinates
by pressing NAV and the POSN
softkey, if needed. The Present
Position Page is displayed.
JKL
4
ENT
ENT
DEF
2
0
ENT
NAV
*Plus POSN softkey
if needed
*Press alphanumeric and
arrow keys, as needed, to
select desired identifier
