3-13
NOTE: If you attempt to delete a proximity or route waypoint, a message will
be displayed. You must delete the proximity alarm or the route before you
can delete the waypoint. (See Sections 3.12 and 6.5.)
The Waypoint List Page also gives you the option of deleting all user
waypoints at one time.
To delete all user waypoints...
· Select the Waypoint List Page by pressing WPT and the LIST softkey,
if needed.
· With the arrow keys, place the cursor over “Delete ALL?” and press
ENT.
· A confirmation page is displayed. Press ENT to confirm the deletion
of all waypoints or CLR to cancel.
NOTE: The “Delete All?” selection will delete all routes and proximity
waypoints as well.
From the Waypoint List Page you may also change the name of any user
waypoint.
To rename a user waypoint...
· Select the Waypoint List Page by pressing WPT and the LIST softkey,
if needed.
· With the arrow keys, place the cursor on the desired waypoint.
· Type in a new name for the waypoint and press ENT.
· A confirmation page is displayed. Press ENT to confirm the name
change or CLR to cancel.
3.9 USING WAYPOINTS
You may use waypoints on many GPS 95 pages. A waypoint is selected by
entering its identifier and pressing ENT. Some waypoints in the database
may have the same identifier. When you have entered a waypoint name that
is not unique, the Duplicate Waypoint Page will be displayed for you to select
the desired waypoint.
