Garmin GPS 50 Owner'S Manual Download Page 67

Page: 67 / 79

C-6

· Remove the E-ring from the special screw under the base using a pair

of pliers.

· Remove the lever.

· Unscrew the special screw and remove it from the base.

· The base, lever, detent pin, detent spring, plastic spacer, and wave

washer may be set aside (these parts are not used for surface
installation).

· Remove the screws which mount the power/data cable and remove

the cable.

· Unscrew and remove the coinslot screw and remove the cradle.

· Drill an oblong hole in the mounting surface to allow clearance for the

power/data cable connector.

· Mount the connector plate to the dash using appropriate screws (#8

flat head screws are recommended).

· Slide the cradle onto the connector plate and install the coinslot screw.

· Install the power/data cable.

To adjust the universal mount...

Summary of Contents for GPS 50
















































































Search results

Summary of Contents for GPS 50

Reviews:

Related manuals for GPS 50

Brands by name

Popular brands

Garmin GPS 50, Owner'S Manual

Search results

Summary of Contents for GPS 50

Reviews:

Related manuals for GPS 50

Brands by name

Popular brands