manualshive.com logo in svg

Garmin GPS 50, Owner'S Manual

The Garmin GPS 50 is a state-of-the-art navigation device designed to provide accurate and efficient route guidance. To ensure a seamless user experience, it comes with an extensive Owner's Manual available for free download. Obtain the comprehensive manual directly from manualshive.com to explore all the features and unlock its full potential.

Share
Download
background image

C-3

C.2  ELECTRICAL WIRING

The GPS 50 power/data cable allows you to connect the unit to vehicle power
systems, other marine electronics, and a remote alarm/beeper.  The harness
will plug into the connector located on the rear panel of the GPS 50.

To connect to vehicle power systems...

· Connect the RED harness lead (with fuse) to the positive (+) side of a

5-40 volt DC power source.

· Connect the BLACK harness lead to the negative (-) side of the 5-40

volt DC power source.

The GPS 50 will drive a remote alarm or relay that requires no more than 100
milliamps of current.  (

WARNING

:  Devices which draw current in excess of

100 milliamperes may damage your unit and will void your warranty.  Consult
the instructions included with the remote alarm or relay for current drain
information.)

To connect to a remote alarm system...

· Connect the BLUE harness lead to the negative side of a transistor

alarm or relay switch.

· Connect the positive side of the alarm or relay to the positive side of

the 5-40 volt DC power source.

The GPS 50 may be connected to other marine electronics such as an
autopilot or plotter which use an NMEA 0180, NMEA 0182 or NMEA 0183

Summary of Contents for GPS 50
















































































Reviews:

No comments

Related manuals for GPS 50

YachtSafe G31 User Manual preview
G31
Brand: YachtSafe Pages: 4
GPT MT 2001 GPS Manual preview
MT 2001 GPS
Brand: GPT Pages: 7
Japan Radio Co. jlr-21 Instruction Manual preview
jlr-21
Brand: Japan Radio Co. Pages: 148
Garmin iQue M3 - Win Mobile Quick Reference Manual preview
iQue M3 - Win Mobile
Brand: Garmin Pages: 20
Garmin Zumo XT Owner'S Manual preview
Zumo XT
Brand: Garmin Pages: 72
Navionics GEONAV 5 User And Installation Manual preview
GEONAV 5
Brand: Navionics Pages: 38
Magellan GPS 3000 User Manual preview
GPS 3000
Brand: Magellan Pages: 82
Eddy Wireless EDW-310BB User Manual preview
EDW-310BB
Brand: Eddy Wireless Pages: 21
Xroad V4050 Manual preview
V4050
Brand: Xroad Pages: 62
Mappy Ulti E508ND Manual preview
Ulti E508ND
Brand: Mappy Pages: 21
Mapmyindia Vx240 Hardware Manual preview
Vx240
Brand: Mapmyindia Pages: 12
RedPort XTRACKER IR Quick Start Manual preview
XTRACKER IR
Brand: RedPort Pages: 4
VDO MT 5011 User Manual preview
MT 5011
Brand: VDO Pages: 6
Americaloc GL300 W Manual preview
GL300 W
Brand: Americaloc Pages: 2
Americaloc GL300 Start Manual preview
GL300
Brand: Americaloc Pages: 5
NorthStar EXPLORER 550 Installation And Operation Manual preview
EXPLORER 550
Brand: NorthStar Pages: 68
NorthStar 972 Quickstart Manual And Reference Manual preview
972
Brand: NorthStar Pages: 184
NorthStar 957 Operator'S Manual preview
957
Brand: NorthStar Pages: 204

Brands by name

Popular brands

Load more brands