Garmin GPS 400W, Installation Manual

Page: 68 / 212

Page 4-14 GNS 400W Series Installation Manual
Rev. G 190-00356-08
Label # Parameter Name 1 2 3 4 5 6 7
316 Wind Angle (True)
● ● ● ● ● ● ●
320 Magnetic Heading
● ● ● ● ● ● ●
321 Drift Angle
● ● ● ● ● ● ●
326G [2] Lateral Scale Factor
● ● ● ● ● ●
327G [1] Vertical Scale Factor
● ● ● ● ●
330 Conic Arc Inbound Course
● ●
331 Conic Arc Radius
● ●
332 Conic Arc Course Change Angle
● ●
333 Airport Runway Azimuth
● ●
334 Airport Runway Length in Feet
● ●
335 Left/Right Hand Holding Pattern Azimuth
● ●
340 Left/Right Hand Procedure Turn Azimuth
● ●
351G Distance To Destination (Via Flight Plan)
● ● ● ● ● ●
352G Estimated Time To Destination (Via Flight Plan)
● ● ● ● ● ●
371G Specific Equipment ID
● ● ● ● ● ●
377 Equipment Hex ID Code
● ● ● ● ● ● ●
[1] Labels 117G/117P and 327G are not transmitted in the default configurations. There is a
configuration setting that can be used to enable the transmission of these labels for the indicated
ARINC 429 output types. Refer to Section 5.3.1 for additional details.
[2] Label 116G and 326G utilize the optional resolution extension bits (bits 11-13).
The following labels are output on the VOR/ILS ARINC 429 OUT port:
Label # Parameter Name
034G VOR/ILS Frequency (BCD)
035G DME Frequency (BCD)
100G Selected Course #1
173 Localizer Deviation
174 Glideslope Deviation
222 VOR Omnibearing
371G Specific Equipment ID
377 Equipment Hex ID Code
The labels recognized on the GPS ARINC 429 IN 1 or GPS ARINC 429 IN 2 ports depend on the
configuration (see Section 5.3.1).
The 400W Series unit can receive traffic data from a Garmin GTX 330 or an L3 Communications
SKY497 SkyWatch system using the GPS ARINC 429 IN 1 or GPS ARINC 429 IN 2 ports, in order to
display traffic information on the 400W Series unit.