background image

GPS 400 Pilot’s Guide and Reference

190-00140-60  Rev. E

SECTION 2 

NAV PAGES

2-13

Displaying airspace boundaries, highways, 
roads, railroad lines, track log data, active 
flight plan course lines, and lat/long grid 
lines:

1)  From the Map Page Menu, turn the large 

right

 

knob to highlight ‘Setup Map?’ and press the 

ENT

 Key.

2)  Turn  the  small 

right

  knob  to  select  the 

appropriate group name (per Table 2-2) and 
press the 

ENT

 Key.

3)  Turn the large 

right

 knob to highlight the zoom 

field for the desired feature.

4)  Turn  the  small 

right

  knob  to  select  the 

maximum range at which the feature should 
appear  on  screen  (or  select ‘Off’  to  never 
display the selected feature).

5)  Press  the 

ENT

  Key  to  accept  the  selected 

option.

Distance Measurements

The  ‘Measure  Dist?’  option  provides  a  quick,  easy 

method for determining the bearing and distance between 
any two points on the Map Display.

Measuring bearing and distance between 
two points:

1)  Turn the large 

right

 knob to highlight ‘Measure 

Dist?’ (Figure 2-20).

Figure 2-20  Map Page Menu

2)  Press  the 

ENT

  Key,  an  on-screen  reference 

pointer  appears  on  the  Map  Display  at  the 
present position.

3)  Turn the small and large 

right

 knobs to place 

the reference pointer at the desired location to 
measure FROM and press the 

ENT

 Key (Figure 

2-21).

Figure 2-21  Using Pointer to Measure Distance and Bearing

4)  Again, use the small and large 

right

 knobs 

to place the reference pointer at the desired 
location  to  measure TO.   The  bearing  and 
distance  from  the  first  reference  location 
appears at the top of the Map Display.

5)  To exit the ‘Measure Dist?’ option, press the 

small 

right

 knob.

Selecting Full Screen Map

The  ‘Data  Fields  Off?’  option  provides  a  full-screen 

Map Display (Figure 2-22), without the four data fields 
along the right-hand side of the screen.  Select this option 
when  to  display  a  larger  map  area.    If  this  option  has 
been selected and the data fields are off, ‘Data Fields On?’ 
appears as an option instead.

Figure 2-22  Full Screen Map

Summary of Contents for GPS 400















































































































































































































































Reviews: