Garmin GNS 530, Installation Manual

Page: 49 / 141

500 SERIES INSTALLATION MANUAL Page 4-23
190-00181-02 Rev Q
4.10.3 DME Tuning Configuration
Refer to section 5.2.12 for the DME tuning configuration.
4.10.4 DME Tuning Calibration and Checkout
None.
4.10.5 DME Tuning Interconnect
Refer to Figure F-29 on page F-59 for the King Serial Panel DME tuning interconnect. Refer to Figure F-
30 on page F-61 for the King Serial Remote DME tuning interconnect. Refer to Figure F-31 on page F-63
for the parallel 2 of 5 DME tuning interconnect. Refer to Figure F-32 on page F-65 for the parallel
BCD/Slip Code DME tuning interconnect.
NOTE
For the GNS 530 to tune a Narco DME 890 or IDME 891 or an ARC (Cessna)
RTA-476A using parallel 2 of 5, unique wiring and configuration are required. Refer to
section 5.2.12 on page 5-13 and Figure F-31 on page F-63.