Garmin GNS 400W, Pilot'S Manual & Reference

Page: 138 / 220

6 - WPT PAGES
128 190-00356-00 Rev G
Airport Departure Page
2. Turn the large right knob to place the cursor
on the departure (DEP) procedure name field.
3. Turn the
small right
knob to display a window
of available departures for the selected airport.
Continue turning the
small right knob to
select the desired departure.
4. Press
ENT
. The cursor moves to the runway
field.
5. Turn the
small right
knob to display a window
of available runways. Continue turning the
small right knob to select the desired runway.
(“ALL” may appear in the runway field, indi-
cating the departure procedure applies to all
runways. For airports with parallel runways,
“B” may appear at the end of the runway des-
ignation to indicate the departure procedure
applies to both runways.)
6. Press ENT . The cursor moves to the transitions
(TRANS) field.
7. Turn the small right knob to display a window
of available transitions. Continue turning the
small right knob to select the desired transi-
tion.
8. Press ENT . To remove the flashing cursor, press
the
small right
knob.
Airport Departure Page Options
The following options are available for the
airport
departure page , by pressing the MENU key:
Load into Active FPL?
As described earlier in this section.
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.