Garmin GNS 400W, Pilot'S Manual & Reference

Page: 42 / 220

2 - NAV PAGES
32 190-00356-00 Rev G
Restoring Factory Settings
You can also quickly return all data field settings to
their original factory settings.
To restore all six data fields to factory default
settings:
1. Starting with the default NAV page, press the
MENU key to display an options menu.
2. Turn the large right knob to highlight the
“Restore Defaults?” option and press ENT .
Dual Unit Considerations
A “Crossfill?” option is provided from the Default
NAV Page. This option allows you to transfer a direct-
to destination, the active flight plan including VNAV
parameters, any stored flight plan or user waypoints to
a second 400W or 500W-series Garmin unit.
See Section 9 - Aux Pages - Flight Planning -
Crossfill Operation for additional details on using the
“Crossfill?” option.
NOTE:
The databases of the 400/500 series and
the 400W/500W are incompatible so you may not
mix systems.
Map Page
The second NAV page is the map page, which dis-
plays your present position using an airplane symbol,
along with nearby airports, navaids, user-defined
waypoints, airspace boundaries, lakes, rivers, high-
ways and cities.
NOTE: The electronic chart is an aid to navigation
and is designed to facilitate the use of authorized
government charts, not replace them. Land and
water data is provided only as a general reference
to your surroundings. The positional accuracy
of the land and water data is not of a precision
suitable for use in navigation and it should not
be used for navigation. Only official government
charts and notices contain all information needed
for safe navigation – and, as always, the user is
responsible for their prudent use.
Data
Fields
Present
Position
Map Display
Map Range
Page location
in NAV group
NOTE:
If the 400W-series unit is unable to
determine a GPS position, the present position
(airplane) symbol will appear on the Map Page in
yellow. No symbol will be present when there is
no active flight plan.
Map Page