6 - WPT PAGES
132
190-00356-00 Rev G
Creating User Waypoints
5. Press
ENT
to accept the selected position.
6. The cursor moves to “Create?”. Press
ENT
to
add the new waypoint to memory.
7. Press the
small right
knob to remove the
flashing cursor.
To create a new user waypoint by referencing an
existing waypoint:
1. With the user waypoint page displayed, press
the
small right
knob to activate the cursor.
2. Use the
small
and
large
right
knobs to
enter a name for the new waypoint and press
ENT
.
3. Turn the
large right
knob to highlight the first
reference waypoint (REF WPT) field.
4. Use the
small
and
large
right
knobs to enter
the identifier of the reference waypoint. The
reference waypoint can be an airport, VOR,
NDB, intersection or another user waypoint.
Press
ENT
to accept the selected identifier.
5. The cursor moves to the radial (RAD) field. Use
the
small
and
large
right
knobs to enter
the radial from the reference waypoint to the
new user waypoint. Press
ENT
to accept the
selected radial.
6. The cursor moves to the distance (DIS) field.
Use the
small
and
large
right
knobs to enter
the distance from the reference waypoint to the
new user waypoint. Press
ENT
to accept the
selected distance.
7. Turn the
large right
knob to highlight
“Create?” and press
ENT
.
8. Press the
small right
knob to remove the
flashing cursor.
NOTE:
The 400W-series units allow you to create
a new user waypoint at a defined radial and
distance from your present position. To reference
your present position, follow the steps above, but
press
CLR
in step #4. “P.POS” will appear in the
reference waypoint (REF WPT) field to indicate
that radial and distance information will refer-
ence your present position.
The second reference waypoint field (REF WPT) is
a temporary reference only—not a reference that
will be stored with the user waypoint. By default,
this field will display a radial from the nearest
VOR. However, you can select any waypoint—by
identifier—to use as a reference in this field.
Your 400W-series unit can store user-defined
Summary of Contents for GNS 400W
