Garmin GNS 400W, Pilot'S Manual & Reference

Page: 127 / 220

6 - WPT PAGES
117 190-00356-00 Rev G
WPT Page Group
Section 6
WPT Pages
WPT Page Group
The Waypoint (WPT) page group provides infor-
mation about the thousands of airports, VORs, NDBs,
intersections, runways, frequencies, and procedures
stored on your Jeppesen NavData
®
card. A WPT page
is also provided to display information for up to 1,000
user-created waypoints.
To quickly select a WPT page:
1. From any page, press and hold
CLR
to select
the default NAV page. (You may skip this step
if you are already viewing any of the main
pages.)
2. Turn the
large right
knob to select the WPT
page group. “WPT” will appear in the lower
right corner of the screen.
3. Turn the small right knob to select the desired
WPT page.
NOTE:
Please note that your 400W-series uses ICAO identifiers for all airports. All U.S. airport identifiers which
contain only letters use the prefix “K”. For example, Los Angeles International is KLAX under the ICAO standard.
Other airports, such as Otten Memorial (3VS), that contain numbers in the identifier, do not require the “K” prefix.
Many foreign countries use two letter prefixes.
Airport Location Airport Runway Airport Frequency Airport Approach Airport Arrival Airport Departure
Intersection NDB VOR
User
Waypoint
NAV
7+ available pages
(see Section 2)
WPT
10 available pages
(see list below)
AUX
4 available pages
(see Section 9)
NRST
8 available pages
(see Section 7)