190-02246-11
GI 275 Part 23 AML STC Maintenance Manual
Rev. 1
Page 5-28
5.11.2 Oil Temperature Sensor
When installing the oil temperature sensor, the unbroken side of the crush washer must face the sensor
flange. The sensor is torqued finger tight plus one-half turn and safety wired in accordance with practices
defined in Section 7,
Safetying
, of Chapter 7,
Aircraft Hardware, Control Cables and Turnbuckles
,
of
AC 43.13-1B
Aircraft Inspection and Repair
.
Figure 5-17 Oil Temperature Sensor Installation Example
