190-02246-11
GI 275 Part 23 AML STC Maintenance Manual
Rev. 1
Page 5-23
5.9.1 GTP 59 Removal
To remove the GTP 59, perform the following procedure:
1. Remove power from the GI 275 that is directly interfaced to the GTP 59.
2. Remove the mounting nut shown in Figure 5-13.
3. Remove the GTP 59 from the hole.
5.9.2 GTP 59 Re-installation
1. Place the GTP 59 in the previous installation hole.
2. Install washer and nut and torque to specifications in Figure 5-13.
5.9.3 GTP 59 Checkout
Perform the Primary ADI checkout procedures in Section 6 of
GI 275 Part 23 AML STC Installation
Manual
(P/N 190-02246-10).
