GARDY SHELTER CCP-EKO 504040, Assembly Instructions Manual

Page: 43 / 130

42 43
GB
CODES PART DESIGNATION DIMENSIONS (MM) QTY
M Bituminous felt Bandes 4,4 m 7
P Patch for fixing bituminous felt 40 x 15 x 2620 mm 10
Q Patch under the battens 40 x 15 x 2140 mm 4
Lay the bitumen felt (part M). Handle it carefully (ideally wearing gloves) to avoid tearing it.
First cover the two edges (front and back) and then move towards the center of the roof,
while remembering to overlap all the previously laid strips. Then attach the fixing patches
(part P) to the edges of the strips using SC1 screws. Then fix the patches under the battens
(part Q) with SC1 screws, bending the felt under the battens - see detailed drawing. This
prevents the roofing felt from tearing and provides a good base for the roof waterproofing.
⑩
ASSEMBLY OF FINISHING ELEMENTS
CODES PART DESIGNATION DIMENSIONS (MM) QTY
N Facade moulding 20 x 95 x 2640 mm 4
R Diamond-shaped finish 20 x 105 x 200 mm 2
Then install the front and back facade mouldings (part N) and the decorative diamond-
shaped finish (part R) using screws SC2.
I
I
I
I
I1
I1
I2
I3