![background image](http://html1.mh-extra.com/html/gardner-denver/welch-vcpro-600-series/welch-vcpro-600-series_operation-manual_563862037.webp)
Operation
Operation manual VCpro 600
37
6.4.2
Connection settings
The vacuum controller can be addressed via RS232 or LAN. Using the menu bar
(see Chapter 6.4.3
it is possible to establish the connection under [Communi-
cation Settings!].
1. Use the toggle switch
Port
(1) to toggle between
RS232
and
LAN
.
2. Select the port used. For
ComPort
(2), all ComPorts found on the PC are listed.
3. Search the LAN network for vacuum controllers in
LAN
mode using the
Search
button (3).
The list of vacuum controllers on the network is updated; with the list you can select a
vacuum controller device. The vacuum controller will be recognized on a pre-defined UDP
port via broadcast key.
4. The connection is established with
Connect
(2). Here it must be noted that only one con-
nection per vacuum controller is permitted.
NOTE
►
If the device is locked, either the user password or the admin password
is requested in order to unlock the end device and communicate via PC
software.
►
The exception is the first press of the STOP button, which can be
pressed without a password, also on the end device, for safety reasons
in order to switch off the function of the end device.
1
2
3
4