Operation
38
operation manual VCpro 600
6.4.3
Main screen
When starting the PC software and by pressing the
Measure
(A) button, you open the main
screen.
A
B
C
D
The graphic shows the course of the pressure over time (C). Here, both the time and the
pressure display area can be set using the parameter field (D). The keys correspond largely
to the keys on the vacuum controller. The buttons are operated with the left mouse button.
Pos.
Element
Function
A
<Menu bar>
Selection of the function areas of the PC software
B
<Display field>
Numeric specification:
Pressure actual value
pressure
Pressure
setpoint
C
<Display field>
Display of pressure actual value (red line) over time for the
connected device
D
<Parameter field>
Setting of the diagram axes:
pressure 0..n
(10…1600 mbar)
time range [min]
(1…83 min)
and pressure data recording:
Storage interval
saving interval [sec]
(1…60 )
Measurement points
saved values
(info display)
1
3
2