![background image](http://html1.mh-extra.com/html/gardner-denver/welch-vcpro-600-series/welch-vcpro-600-series_operation-manual_563862036.webp)
Operation
36
operation manual VCpro 600
Display log files
1. Select the "System settings" menu option.
2. Select the "Log files" menu option.
3. Select the "Log files" menu option.
4. Select a log file.
5. Confirm your entry.
Delete log files
1. Select the "System settings" menu option.
2. Select the "Log files" menu option.
3. Select the "Display log files" menu option.
4. Press the rotary encoder for 2 s.
5. You will see "Do you really want to delete log files?"
6. Confirm your selection with "Yes."
6.3.3
Reset to factory settings
1. Select the "System settings" menu option.
2. Select the "Reset to factory settings" menu option.
3. Confirm your selection with "Yes."
NOTE
After selecting "Yes" (with check mark), the language is set back to the factory setting
(English). All values are also reset to the factory settings.
6.4
"PC-Control 601" PC software (Option)
The
PC-Control 601
handles remote control of the vacuum controller VCpro 600 series.
Generally, the PC software offers all control possibilities, just like on the end device. In addi-
tion, the following operations are possible with the PC software:
Firmware updates
Transfer time and date from the PC
Factory settings & factory calibration (not public)
6.4.1
Installation
NOTE
The PC software can be downloaded as installer package. The file "setup.exe" installs
the PC software and the required CVI Runtime Environment.
1. Select the "
PC-Control 601"
PC software. It is available as freeware from
on the "Service" menu
download area.
2. Call up the PC software with "VC601_
XXX
.exe" in the installation directory.
NOTE
XXX
describes the sequential version number of the PC software.