![background image](http://html1.mh-extra.com/html/gardner-denver/welch-vcpro-600-series/welch-vcpro-600-series_operation-manual_563862021.webp)
Description
Operation manual VCpro 600
21
4.3.2
Navigation
The user interface for the vacuum controller features three levels:
Level
Description
A
Start window
B
Parameter for the operating mode/system settings
C
Active operating mode
On the start window (level A), the operating mode of system setting is selected with a TURN
of the rotary encoder. The selection in the parameter table of the operating mode or the sys-
tem setting (level B) is made with the rotary encoder by PRESSING. To adjust the parame-
ters
see Chapter 6.2 Operating modes and system settings
Use the
START / STOP
button to change to the active operating mode (level C). If an oper-
ating mode is selected on the start window (level A) and the
START / STOP
button is
pressed, then the selected operating mode is activated directly (level C).
In active operating mode, the display can be changed between
numeric
and
graphic
display
by pressing the
BACK
button. You can change between the display types at will during op-
eration.
4.4
Device models
4.4.1
Vacuum controller VCpro 601 (vacuum control valve)
Figure
Pos. Description
1
Interface: RS 232
2
Device complete
3
Connection: vacuum pump
4
Connection: vacuum apparatus
5
Connection: level sensor
6
Connection: water valve
7
Ventilation valve
8
Connection: inert gas
9
Sensor, integrated
10
Backflow-stop valve, integrated
11
Vacuum control valve
12
Power socket
13
Device fuse
14
Device main switch
15
Interface: RJ 45 LAN