Gardner Denver RBS 15, Service Manual And Parts List

Page: 30 / 62

5.3.1 Sizes from 15 to 25
Remove the cover 5B
Place four sheets LM with thickness alike the value of the maximum clearance indicated in the table 7.4 in
the third column as indicated in figure 29
LM LM
LM LM
Fig. 29
Place the cover 5B
Insert the oil splash disks 23B by means of a pipe as indicated in figure 30
Pipe
Oil splash disk 23B
Fig. 30
Mount the bearings Pos. 33 as indicated at paragraph 5.7
Extract the four sheets LM pulling them towards the external of the casing 1
Fix the bearings cover pos. 35
Mount the timing gear following the procedure of the paragraph 5.8
Mount the gear side oil sump 12B with a new gasket 50
Fix the oil sump with the screws Pos. 70