Gardner Denver RBS 15, Service Manual And Parts List

Page: 12 / 62

2.4 Disassembling of the drive devices
2.4.1 Direct drive coupling
Loose the safety screw G fixing the key 30
Extract the coupling by means of a suitable device.
WARNING: Do not use the hammer to extract the coupling.
Screw G
Key pos. 30
Fig. 3
Remove the key 30 from blower shaft
2.4.2 V-belt drive coupling
Unscrew the fixing screws V and screws 1 or 2 of these one (following the sleeve type) alternatively into the
extraction holes E until to unlocking the sleeve, remove the pulley and the sleeve
WARNING: Do not use the hammer to extract the pulley.
E V E V V
Fig. 4
V V E E
TAPER LOCK system MGT system
Remove the key 30 from the blower shaft
Bronze pad